Please note the Fishscale panel comes in
two forms:
Form 1 - Fishscales cover the
whole of the panel. This is the most
economical form of Fishscale
panelling and would be used on walls.
When installing the panels above each other
on a vertical
surface you can fix them as is, or you can
scallop the lower edge of the top panel, see
below:
Form 2 - This version has a flat area
running along the top and the bottom
of the panel. This style
of panel would be used on areas such as
window awnings where the flat edge areas
could
be needed to roll or curve. You can
partially see the flat edges in this
photograph:
The flat edges each measure about 75 mm (3")
in depth |
